Siemens RUGGEDCOM ROX II User Manual page 428

Chapter 12
Tunneling and VPNs
Parameter
transport-encap { transport-encap }
authentication { authentication }
secret { secret }
digest { digest }
interop { interop }
persist-pend-timeout { persist-pend-
timeout }
hello { hello }
hidden
receive-windows { receive-windows }
established-timeout { established-
timeout }
log
4. Add one or more sessions to the tunnel configuration. For more information, refer to
"Adding a Session".
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
5.
382
IP address of local interface that is used as Source IP address of outbound traffic over
tunnel.
Synopsis: { udp, ip }
Default: udp
The transport protocol (UDP or IP) to encapsulate the tunnel messages
Synopsis: { none, challenge }
Default: none
The authentication of tunnel
Synopsis: A string 1 to 63 characters long
The password of tunnel negotiation
Synopsis: { md5, sha1 }
Default: md5
Message digest AVP encryption
Synopsis: A 32-bit signed integer between 0 and 65535
Default: 0
Specify a bitmask of flags to control non-standard behaviour for interopability with other
L2TPv3 implementation
Synopsis: A 32-bit signed integer between 10 and 6000
Default: 60
The time (in seconds) that a persisting tunnel will wait in RETRY state before trying to
establish itself again
Synopsis: A 32-bit signed integer between 5 and 1000
Default: 60
timeout used for periodic L2TP Hello messages (in seconds)
Synopsis: { true, false }
Default: false
Enables/Disabled AVP hidden
Synopsis: A 32-bit signed integer between 5 and 512
Default: 10
Received windows size
Synopsis: A 32-bit signed integer between 30 and 1000
Default: 120
The time (in seconds) that a tunnel will wait for the peer to complete the tunnel setup
message exchange
Synopsis: { true, false }
Default: false
Enables/Disables logging tunnel control messages
Description
Section 12.4.5.2,
Adding a Dynamic L2TPv3 Tunnel
RUGGEDCOM ROX II
CLI User Guide