Siemens RUGGEDCOM ROX II User Manual page 65

RUGGEDCOM ROX II
CLI User Guide
Using RUGGEDCOM ROX II
This chapter describes how to use the RUGGEDCOM ROX II interface.
CONTENTS
• Section 2.1, "Default User Names and Passwords"
• Section 2.2, "Logging In"
• Section 2.3, "Logging Out"
• Section 2.4, "Using Network Utilities"
• Section 2.5, "Using the Command Line Interface"
• Section 2.6, "Configuring the CLI Interface"
• Section 2.7, "Accessing Different Modes"
Section 2.1
Default User Names and Passwords
The following default passwords are pre-configured on the device for each access mode:
CAUTION!
Security hazard – risk of unauthorized access and/or exploitation. To prevent unauthorized access to
the device, change the default passwords before commissioning the device. For more information,
refer to Section 5.9, "Managing Passwords and
Mode
Service
Maintenance
Administrator
Operator
Guest
Section 2.2
Logging In
To log in to RUGGEDCOM ROX II, do the following:
Default User Names and Passwords
Passphrases".
Username
root
root
admin
oper
guest
Using RUGGEDCOM ROX II
Password
admin
admin
admin
oper
guest
Chapter 2
19