Siemens RUGGEDCOM ROX II User Manual page 56

Chapter 1
Introduction
Services
HTTPS
TCP Modbus
IPSec IKE
IPSec NAT-T
DNPv3
RawSocket
DHCP Agent
DHCP Server
RADIUS
TACACS+
L2TP
BGP
RIP
MPLS-Ping
LDP
L2TPv3
Section 1.5
User Permissions
The following table lists the operation, configuration, and action commands permitted to the administrator,
operator, and guest users.
Types of user access:
• Create (C) - can create and remove optional parameters
• Execute (E) - can run an action or command
• No - no access
• Read (R) - read access
• Update (U) - can modify existing parameter
Commands/Paths Permitted
config private | exclusive | no-confirm
/admin/software-upgrade
/admin/rox-imaging
10
Port Number
TCP/443
TCP/502
UDP/500
UDP/4500
TCP/20000
TCP/configured
UDP/67
UDP/67 listening, 68 responding
UDP/1812 to send, opens random port
to listen
TCP/49 to send, opens random port to
listen
Random Port
TCP/179
UDP/520
UDP/3503
TCP/646 and UDP/646
UDP/1701
Administrator
Allowed
R/U
R/U
Port Open
Open (if configured with login)
Open (if configured)
Open (if configured)
Open (if configured)
Open (if configured)
Open (if configured)
Open (if configured)
Open (if configured)
Open (if configured)
Open (if configured)
Open (if configured)
Open (if configured)
Open (if configured)
Open (if configured)
Open (if configured)
Open (if configured)
Access
Operator Guest
Allowed No
R No
R No
RUGGEDCOM ROX II
CLI User Guide
Port
Default
Open
Closed
Closed
Closed
Closed
Closed
Closed
Closed
Closed
Closed
Closed
Closed
Closed
Closed
Closed
Closed
Notes
User Permissions
Access
Authorized
Yes
No
Yes
Yes
No
No
No
No
Yes
Yes
Yes
No
No
No
No
No