Siemens RUGGEDCOM ROX II User Manual page 286

Chapter 7
IP Address Assignment
options
client
no hostname
no subnetmask
no default-route
no broadcast
no domain
no dns-server
no static-route
no nis server
no nis domain
!
!
!
!
!
If no host groups have been configured, add host groups as needed. For more information, refer to
Section 7.3.9.2, "Adding a Host
Section 7.3.9.2
Adding a Host Group
To add a host group to the DHCP server, do the following:
1. Make sure the CLI is in Configuration mode.
2. Navigate to:
• For IPv4
services dhcpserver host-groups
• For IPv6
services dhcpserver6 host-groups
3. Configure the following parameter(s) as required:
Parameter
{ name }
4. Configure the options for the host group. For more information, refer to
Group Options".
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
5.
Section 7.3.9.3
Configuring Host Group Options
To configure options for a host group on the DHCP server, do the following:
NOTE
Options set at the host group level override options set at the DHCP server level.
1. Make sure the CLI is in Configuration mode.
240
Group".
Synopsis: A string 1 to 32 characters long
The description of the host groups.
Description
Section 7.3.9.3, "Configuring Host
Adding a Host Group
RUGGEDCOM ROX II
CLI User Guide