Siemens RUGGEDCOM ROX II User Manual page 91

RUGGEDCOM ROX II
CLI User Guide
Parameter
show-defaults { true | false }
terminal { dumb | vt100 | xterm
| linux | ansi }
Section 2.7
Accessing Different Modes
Aside from normal mode, there are three additional modes within RUGGEDCOM ROX II that offer various controls
over the operating system.
CONTENTS
• Section 2.7.1, "Accessing BIST Mode"
• Section 2.7.2, "Accessing Service Mode"
• Section 2.7.3, "Accessing Maintenance Mode"
Section 2.7.1
Accessing BIST Mode
BIST (Built-In-Self-Test) mode is used by RUGGEDCOM ROX II to test and configure internal functions of the device.
The method for accessing BIST is different if a new software image has been flashed onto the flash card.
CAUTION!
Security hazard – risk of unauthorized access and/or exploitation. Access to BIST mode should be
restricted to admin users only.
CAUTION!
Configuration hazard – risk of data corruption. BIST mode is provided for troubleshooting and
advanced configuration purposes and should only be used by Siemens Canada Ltd technicians. As
such, this mode is not fully documented. Misuse of the commands available in this mode can corrupt
the operational state of the device and render it inaccessible.
NOTE
BIST mode opens port 222.
Accessing Different Modes
Determines if default values are shown when displaying the configuration. When enabled,
default values appear as comments after the configured value. In the following example, the
default value for the contact value is shown as a comment following the configured contact
string of wsmith@example.com:
ruggedcom# show running-config admin contact
admin
contact "wsmith@example.com"
!
Default values only appear for parameters that have default values. If a parameter does not
have a default value, no default appears when show-defaults is set to true.
Determines the terminal type and controls how line editing is performed. Supported
terminals are: dumb, vt100, xterm, linux, and ansi. Other terminals may also work but have
no explicit support.
Using RUGGEDCOM ROX II
Description
! Contact
Chapter 2
45