Siemens RUGGEDCOM ROX II User Manual page 312

Chapter 7
IP Address Assignment
!
!
If no domain name servers have been configured, add servers as needed. For more information, refer to
Section 7.4.2.2, "Adding a Domain Name
Section 7.4.2.2
Adding a Domain Name Server
To add a domain name server, do the following:
1. Make sure the CLI is in Configuration mode.
2. Add the domain name server by typing:
admin dns server address
Where:
• address is the IP address of the domain name server.
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 7.4.2.3
Deleting a Domain Name Server
To delete a domain name server, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the domain name server by typing:
no admin dns server address
Where:
• address is the IP address of the domain name server.
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
266
Server".
RUGGEDCOM ROX II
CLI User Guide
Adding a Domain Name Server