Siemens RUGGEDCOM ROX II User Manual page 561

RUGGEDCOM ROX II
CLI User Guide
• Neighbor 1.1.2.1
Parameter
Neighbor IP Address
Autonomous System ID
• Neighbor 1.1.3.2
Parameter
Neighbor IP Address
Autonomous System ID
For more information, refer to
c. Define a redistribution metric for BGP of type connected. For more information, refer to
Section 13.8.10.2, "Adding a Redistribution
4. Configure R3
a. Enable BGP and configure the following parameters:
Parameter
Autonomous System ID
Router ID
For more information, refer to
b. Define the following BGP neighbor:
Parameter
Neighbor IP Address
Autonomous System ID
For more information, refer to
c. Define a redistribution metric for BGP of type connected. For more information, refer to
Section 13.8.10.2, "Adding a Redistribution
Verification
Verify the configuration by navigating to routing » status » bgp » route on R1. The following routes should be
displayed:
NETWORK ADDRESS
-----------------------------------------------------------------------------------------
1.1.1.0/30
1.1.1.2
1.1.2.0/30
1.1.1.2
1.1.3.0/30
1.1.2.2
Example: Route Reflection in a VRF Instance
Value
1.1.2.1
100
Value
1.1.3.2
101
Section 13.8.6.2, "Adding a
Value
101
5.5.5.3
Section 13.8.1, "Configuring
Value
1.1.3.1
101
Section 13.8.6.2, "Adding a
SELECTED INTERNAL
true true 0
true true 0
true true 0
Neighbor".
Metric".
BGP".
Neighbor".
Metric".
LOCAL
METRIC PREFERENCE WEIGHT
100 0
100 0
100 0
Unicast and Multicast Routing
AS
PATH ORIGIN
Unspecified
Unspecified
Unspecified
Chapter 13
515