Siemens RUGGEDCOM ROX II User Manual page 522

Chapter 13
Unicast and Multicast Routing
Parameter
start { start }
expire { expire }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
6.
Section 13.7.9.5
Deleting a Key Chain
To delete a key chain for dynamic RIP routes, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the key chain by typing:
no routing rip key-chain name
Where:
• name is the name of the key chain
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 13.7.9.6
Deleting a Key
To delete a key from a key chain, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the key by typing:
no routing rip key-chain name key id
Where:
• name is the name of the key chain
• id is the ID of the key
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
476
Synopsis: A string
Sets the time period in which the key on the key chain is considered valid.
Synopsis: { infinite } or a string
The time at which the key expires.
Description
Deleting a Key Chain
RUGGEDCOM ROX II
CLI User Guide