Siemens RUGGEDCOM ROX II User Manual page 85

Hide thumbs Also See for RUGGEDCOM ROX II:
Table of Contents

Advertisement

RUGGEDCOM ROX II
CLI User Guide
Section 2.5.10.3
Interface and Services Commands
Operational mode provides commands for restarting and displaying information for various interfaces and
services.
Parameter
interfaces modem modem [ at |
reset ]
interfaces serial restart-
serserver
interfaces clearstatistics [
ddsName | t1e1Name | t3e3Name ]
name
services dhcpserver show-active-
leases
Section 2.5.10.4
Administration Commands
Operational mode provides commands for performing device administration tasks.
Parameter
admin acknowledge-all-alarms
admin clear-all-alarms
admin delete-all-ssh-known-hosts
admin delete-ssh-known-hosts
admin restore-factory-defaults
admin reboot
admin restore-factory-defaults
admin set-system-clock time
YYYY-MM-DD HH:MM:SS
Interface and Services Commands
Sends an AT or reset command to the specified modem. Use auto completion to display a list
of available modems.
• at: Sends an AT command to the selected modem. To send multiple AT commands,
separate each command with a : colon.
• reset: Resets the modem.
Restarts the serial communication service.
Clears statistics for the specified WAN interface. Use tab completion to display a list of
available WAN interfaces.
Displays active DHCP leases.
Acknowledges all system alarms.
Clears all system alarms.
Deletes the list of known hosts.
Deletes the host entry from the list of known hosts.
Restores the factory default configuration and settings, but does not erase any files you have
saved on the device.
Reboots the device.
Restores the factory default configuration and settings, but does not erase any files you have
saved on the device.
Sets the date and time on the device. To specify just the date, type the date in the format
YYYY-MM-DD. To specify just the time, type the time in the format HH:MM:SS. To specify
both date and time, enclose the string in quotation marks and type the date and time in the
format "YYYY-MM-DD HH:MM:SS".
NOTE
When setting the time, specifying seconds seconds (SS) is optional.
Using RUGGEDCOM ROX II
Description
Description
Chapter 2
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents