Siemens RUGGEDCOM ROX II User Manual page 109

RUGGEDCOM ROX II
CLI User Guide
RX5000 4FG05
RX5000 4FG50
RX5000 4FX01
RX5000 4FX02
RX5000 4FX03
RX5000 4FX04
RX5000 4FX05
RX5000 4FX06
RX5000 4FX07
.
.
.
Section 4.4
Shutting Down the Device
To shut down the device, type:
CAUTION!
Security hazard – risk of unauthorized access and/or exploitation. Always shutdown the device before
disconnecting power. Failure to shutdown the device first could result in data corruption.
NOTE
The device never enters a permanent shutdown state. When instructed to shutdown, the devices shuts
down and provides a time-out period during which power can be disconnected from the device. The
default time-out period is 300 seconds (five minutes). At the end of the time-out period, the device
reboots and restarts.
NOTE
If wiring hinders the process of disconnecting power from the device, the power module(s) can be
removed instead.
admin shutdown
Section 4.5
Rebooting the Device
To reboot the device, type:
admin reboot
Shutting Down the Device
12-86-0015-001 4x 1000LX Singlemode 1310nm LC 25km
12-86-0202-042
12-86-0202-042
12-86-0015-001 4x 1000LX SFP
12-86-0201-001
12-86-0201-001
12-86-0018-002 4x 100FX Multimode ST 2km
12-86-0018-001 4x 100FX Multimode SC 2km
12-86-0018-003 4x 100FX Multimode MTRJ 2km
12-86-0018-006 4x 100FX Singlemode 1310nm ST 20km
12-86-0018-005 4x 100FX Singlemode 1310nm SC 20km
12-86-0018-007 4x 100FX Singlemode 1310nm LC 20km
12-86-0018-008 4x 100FX Singlemode 1310nm SC 50km
Chapter 4
Device Management
63