Siemens RUGGEDCOM ROX II User Manual page 789

RUGGEDCOM ROX II
CLI User Guide
Parameter
key { key }
ntp-version { ntp-version }
ttl { ttl }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
5.
Section 17.9.3.3
Deleting a Broadcast/Multicast Address
To delete a broadcast/multicast address for an NTP server, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the restriction by typing:
no services ntp broadcast address
Where:
• address is the broadcast or multicast address
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Deleting a Broadcast/Multicast Address
Synopsis: A string
Authentication key.
Synopsis: A 32-bit signed integer between 1 and 4
The version of the NTP protocol used to communicate with this host. Change this only if
it is known that the host requires a version other than 4.
Synopsis: An 8-bit unsigned integer between 1 and 127
Default: 1
Time to live.
Description
Chapter 17
Time Services
743