Siemens RUGGEDCOM ROX II User Manual page 227

RUGGEDCOM ROX II
CLI User Guide
NOTE
Before inserting the contents of the certificate, enter multi-line mode by pressing Esc+m. Press Ctrl
+d to exit multi-line mode after the certificate has been added.
Parameter
contents { contents }
private-key-name { private-key-name }
ca-name { ca-name }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
5.
Section 6.8.7.4
Deleting a Certificate
To delete a certificate, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the certificate by typing:
no security crypto certificate certificate
Where:
• certificate is the name of the certificate.
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 6.8.8
Managing Known Hosts
RUGGEDCOM ROX II maintains a Known Hosts list for defining each SSH (SCP) server the device pulls updates or
files from. Servers are identified by their host name or IP address. Users can further define a specific port on the
server designated for SSH communications and/or an SSH/RSA public key.
Servers can also be enabled or disabled.
CONTENTS
• Section 6.8.8.1, "Viewing a List of Known Hosts"
• Section 6.8.8.2, "Adding a Known Host"
• Section 6.8.8.3, "Deleting a Known Host"
Deleting a Certificate
Synopsis: A string 1 to 8192 characters long
The contents of the certificate.
This parameter is mandatory.
Synopsis: A string
The private key associated with this certificate.
Synopsis: A string
The optional CA certificate for this certificate.
Description
Chapter 6
Security
181