Siemens RUGGEDCOM ROX II User Manual page 663

RUGGEDCOM ROX II
CLI User Guide
IMPORTANT!
Well-formed stateful firewall rules are required. For more information, refer to
"Stateless vs. Stateful
1. Configure a firewall with stateful firewall rules to control inbound and outbound traffic. For more
information, refer to
2. Make sure the VRRP service is enabled. For more information, refer to
VRRP".
3. Configure VRRP instances and groups. For more information, refer to
Instance" and Section 14.1.5.2, "Adding a VRRP
4. Define one or more dedicated links for each VRRP group. For more information, refer to
"Adding a Dedicated
5. Select a link to be the default dedicated link for any VRRP group not assigned a dedicated link. For more
information, refer to
6. Enable the configuration synchronization service. For more information, refer to
Disabling Connection
Once the configuration is complete, verify the status of the service on both devices. For more information, refer to
Section 14.1.10.7, "Viewing the Status of Each Dedicated
Section 14.1.10.2
Enabling/Disabling Connection Synchronization
To enable or disable connection synchronization, do the following:
1. Make sure the CLI is in Configuration mode.
2. Enable or disable connection synchronization by typing:
Enabling
services conn-sync enabled
Disabling
no services conn-sync enabled
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 14.1.10.3
Viewing a List of Dedicated LInks
To view a list of dedicated links, type:
show running-config services conn-sync dedicated-link | tab
If dedicated links have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config services conn-sync dedicated-link | tab
NAME INTERFACE
---------------------------------------------------------------
3 fe-2-3
4 fe-2-4
Enabling/Disabling Connection Synchronization
Firewalls".
Section 6.9.3, "Adding a
Link".
Section 14.1.10.6, "Selecting a Default Dedicated
Synchronization".
IP MCAST IP
100.0.5.1 225.0.0.51
100.1.5.1 225.0.0.52
Firewall".
Group".
Link".
SEND RECV
GROUP BUFFER BUFFER
3781 1220 1220
3782 1220 1220
Network Redundancy
Section 6.9.1.1,
Section 14.1.3, "Enabling/Disabling
Section 14.1.6.2, "Adding a VRRP
Section 14.1.10.4,
Link".
Section 14.1.10.2, "Enabling/
Chapter 14
617