Siemens RUGGEDCOM ROX II User Manual page 374

Chapter 10
Serial Server
Parameter
transport
rx-packets
tx-packets
target-port
status
Section 10.1.3
Viewing DNP Device Table Statistics
To view the statistics collected for DNP device tables, type:
show interfaces serial dnp-device-table
A table or list similar to the following appears:
ruggedcom# show interfaces serial dnp-device-table | tab
DEVICE
ADDRESS REMOTE IP
---------------------------------
10 -
20 10.200.22.199
This table or list provides the following information:
Parameter
device-address
remote-ip
serial-port
328
This parameter is mandatory.
Synopsis: A string 1 to 8 characters long
The transport protocol (UDP or TCP) for this serial port.
This parameter is mandatory.
Synopsis: A 32-bit unsigned integer
The number of packets received from TCP/UDP.
This parameter is mandatory.
Synopsis: A 32-bit unsigned integer
The number of packets transmitted to TCP/UDP.
This parameter is mandatory.
Synopsis: A string 1 to 1024 characters long
The target serial port.
This parameter is mandatory.
Synopsis: A string 1 to 31 characters long
The connection status of the serial port.
This parameter is mandatory.
SERIAL
PORT
ser-3-1
-
Synopsis: A string 1 to 32 characters long
The DNP device address.
Synopsis: A string 1 to 32 characters long
The IP address of the remote host that provides a connection to the this DNP device address.
This parameter is mandatory.
Synopsis: A string 1 to 128 characters long
The target serial port.
This parameter is mandatory.
Description
Description
Viewing DNP Device Table Statistics
RUGGEDCOM ROX II
CLI User Guide