Siemens RUGGEDCOM ROX II User Manual page 699

RUGGEDCOM ROX II
CLI User Guide
Section 14.3.8
Viewing the Status of RSTP
To view the status of the RSTP network, type:
show switch spanning-tree rstp-status
A list similar to the following appears:
ruggedcom# show switch spanning-tree rstp-status
rstp-status
status
bridge priority
bridge mac
root priority
root mac
regional root priority
regional root mac
root port slot
root port port
root path cost
regional root path cost
configured hello time
learned hello time
configured forward delay 15
learned forward delay
configured max age
learned max age
total top changes
This list provides the following information:
Parameter
status
bridge-priority
bridge-mac
root-priority
root-mac
regional-root-priority
Viewing the Status of RSTP
notDesignatedForAnyLAN
32768
00:0a:dc:f6:c6:ff
32768
00:0a:dc:00:71:57
32768
00:0a:dc:f6:c6:ff
lm1
1
38
0
2
2
15
20
20
5
Synopsis: { none, designatedBridge, notDesignatedForAnyLAN, rootBridge }
The spanning tree status of the bridge. The status may be root or designated. This field may
show text saying 'not designated for any LAN' if the bridge is not the designated bridge for
any of its ports.
This parameter is mandatory.
Synopsis: A 32-bit signed integer
The bridge identifier of this bridge.
This parameter is mandatory.
Synopsis: A string 17 characters long
The bridge identifier of this bridge.
This parameter is mandatory.
Synopsis: A 32-bit signed integer
The ports to which the multicast group traffic is forwarded.
This parameter is mandatory.
Synopsis: A string 17 characters long
The ports to which the multicast group traffic is forwarded.
This parameter is mandatory.
Synopsis: A 32-bit signed integer
The bridge identifier of the Internal Spanning Tree (IST) regional root bridge for the Multiple
Spanning Tree (MST) region this device belongs to.
This parameter is mandatory.
Description
Chapter 14
Network Redundancy
653