Siemens RUGGEDCOM ROX II User Manual page 723

RUGGEDCOM ROX II
CLI User Guide
Parameter
enabled
target-address { target-address }
trap-port { trap-port }
security-model { security-model }
user-name { user-name }
security-level { security-level }
control-community { control-community }
tag-list { tag-list }
inform-timeout { inform-timeout }
inform-retries { inform-retries }
target-engine-id { target-engine-id }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Adding an SNMP Target Address
A descriptive name for the target (ie. 'Corportate NMS').
Synopsis: { true, false }
Default: true
Enables/disables this specific target.
Synopsis: A string
An IPv4 or IPv6 address for the remote target.
This parameter is mandatory.
Synopsis: A 16-bit unsigned integer between 0 and 65535
Default: 162
The UDP Port for the remote target to receive traps on.
Synopsis: { v1, v2c, v3 }
Default: v2c
The SNMP security model to use: SNMPv1, SNMPv2c, or USM/SNMPv3.
Synopsis: A string
The user name to be used in communications with this target.
This parameter is mandatory.
Synopsis: { noAuthNoPriv, authNoPriv, authPriv }
Default: noAuthNoPriv
The SNMP security level:
• authPriv: Communication with authentication and privacy.
• authNoPriv: Communication with authentication and without privacy.
• noAuthnoPriv: Communication without authentication and privacy.
Synopsis: A string 1 to 32 characters long
Restricts incoming SNMP requests from the IPv4 or IPv6 address associated with this
community.
Synopsis: { snmpv1_trap, snmpv2_trap, snmpv2_inform, snmpv3_trap,
snmpv3_inform }
Default: snmpv2_trap
Selects the type of trap communications to be sent to this target.
NOTE
Multiple options can be selected.
Synopsis: A 32-bit signed integer between 0 and 2147483647
Default: 6000
The timeout used for reliable inform transmissions (seconds*100).
Synopsis: A 32-bit signed integer between 0 and 255
Default: 3
The number of retries used for reliable inform transmissions.
Synopsis: A string
The target's SNMP local engine ID. This field may be left blank.
Network Discovery and Management
Description
Chapter 15
677