Siemens RUGGEDCOM ROX II User Manual page 539

RUGGEDCOM ROX II
CLI User Guide
• action is the action.
• match is the regular expression to match with the autonomous system path. For more information about
regular expressions, refer to
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 13.8.5.5
Deleting an Autonomous System Path
To delete an autonomous system path filter for dynamic BGP routes, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the filter key by typing:
no routing bgp filter as-path name
Where:
• name is the name of the autonomous system path filter
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 13.8.5.6
Deleting an Autonomous System Path Filter Entry
To delete an entry for an autonomous system path filter, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the filter key by typing:
no routing bgp filter as-path name entry action match
Where:
• name is the name of the autonomous system path filter
• action is the action
• match is the regular expression to match with the autonomous system path
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 13.8.6
Managing Neighbors
Neighbors are other routers with which to exchange routes. One or more neighbors must be specified in order for
BGP to operate.
Deleting an Autonomous System Path
Section 2.5.7, "Using Regular
Unicast and Multicast Routing
Expressions".
Chapter 13
493