Siemens RUGGEDCOM ROX II User Manual page 5

RUGGEDCOM ROX II
CLI User Guide
Copyright © 2018 Siemens Canada Ltd
All rights reserved. Dissemination or reproduction of this document, or evaluation and communication of its
contents, is not authorized except where expressly permitted. Violations are liable for damages. All rights
reserved, particularly for the purposes of patent application or trademark registration.
This document contains proprietary information, which is protected by copyright. All rights are reserved. No part
of this document may be photocopied, reproduced or translated to another language without the prior written
consent of Siemens Canada Ltd.
Disclaimer Of Liability
Siemens has verified the contents of this document against the hardware and/or software described. However,
deviations between the product and the documentation may exist.
Siemens shall not be liable for any errors or omissions contained herein or for consequential damages in
connection with the furnishing, performance, or use of this material.
The information given in this document is reviewed regularly and any necessary corrections will be included
in subsequent editions. We appreciate any suggested improvements. We reserve the right to make technical
improvements without notice.
Registered Trademarks
RUGGEDCOM™ and ROS™ are trademarks of Siemens Canada Ltd.
Linux® is the registered trademark of Linus Torvalds in the United States and other countries.
The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus
Torvalds, owner of the mark on a world-wide basis.
Other designations in this manual might be trademarks whose use by third parties for their own purposes would
infringe the rights of the owner.
Open Source
RUGGEDCOM ROX II is based on Linux®. Linux® is made available under the terms of the
License Version 2.0
RUGGEDCOM ROX II contains additional Open Source Software. For license conditions, refer to the associated
License Conditions document.
Security Information
Siemens provides products and solutions with industrial security functions that support the secure operation of
plants, machines, equipment and/or networks. They are important components in a holistic industrial security
concept. With this in mind, Siemens' products and solutions undergo continuous development. Siemens
recommends strongly that you regularly check for product updates.
For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g.
cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept.
Third-party products that may be in use should also be considered. For more information about industrial security,
visit https://www.siemens.com/industrialsecurity.
[http://www.gnu.org/licenses/gpl-2.0.html].
RUGGEDCOM ROX II
GNU General Public
v