Siemens RUGGEDCOM ROX II User Manual page 274

Chapter 7
IP Address Assignment
Parameter
5. Define the NetBios server settings by configuring the following parameters as required:
Parameter
scope { scope }
nameserver { nameserver }
6. [Optional] Add custom options. For more information, refer to
Configuration Option".
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
7.
Section 7.3.5.2
Configuring Standard DHCP Client Configuration Options (IPv6)
Configuration options for DHCP clients can be configured globally or for an individual shared network, subnet,
host group or host.
NOTE
Options set for individual shared networks, subnets, host groups or hosts override the options set at the
global level.
To configure client options, do the following:
1. Make sure the CLI is in Configuration mode.
2. Navigate to services » dhcpserver6 » {path} » {name} » options, where path is the path to and name of the
desired shared network, subnet6, host group or host and name is the user-added name.
For example, to access the options for a shared network named Shared, navigate to:
services » dhcpserver6 » shared-network » Shared » options
To access the global options, navigate to:
services » dhcpserver6 » options
3. Set the client options by configuring the following parameters as required:
Parameter
domain { domain }
dns-server { dns-server }
228
The NIS domain name that the DHCP server offers to the client when it issues the lease to
the client.
Synopsis: A string 1 to 256 characters long
Default: netbios
The NetBIOS scope that the DHCP server offers to the client when it issues the lease to
the client.
Synopsis: A string 1 to 256 characters long
Default: 127.0.0.1
The NetBIOS name server that the DHCP server offers to the client when it issues the
lease to the client.
Synopsis: A string 1 to 253 characters long
The domain name that the server offers to the client when it issues the lease to the
client.
Synopsis: A string 6 to 87 characters long
The domain name server that the server offers to the client when it issues the lease to
the client.
Configuring Standard DHCP Client Configuration Options
Description
Description
Section 7.3.5.4, "Adding a Custom DHCP Client
Description
RUGGEDCOM ROX II
CLI User Guide
(IPv6)