Siemens RUGGEDCOM ROX II User Manual page 127

RUGGEDCOM ROX II
CLI User Guide
no admin logging server address selector name
Where:
• address is the IP address of the remote server
• name is the name of the log selector identifier
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 4.11
Managing the Software Configuration
Configuration parameters for RUGGEDCOM ROX II can be saved on the device and loaded in the future.
CONTENTS
• Section 4.11.1, "Saving the Configuration"
• Section 4.11.2, "Loading a Configuration"
Section 4.11.1
Saving the Configuration
To save the configuration settings for RUGGEDCOM ROX II as a separate file, type:
admin full-configuration-save format cli file-name filename
Where:
• filename is the name of the configuration file
Alternatively, to include only the default configuration parameter values in the saved configuration file, do the
following:
1. Make sure the CLI is in Configuration mode.
2. Save the default values by typing:
save filename | details
Where:
• filename is the name of the configuration file
If required, once the configuration file has been saved, back it up to a USB mass storage drive. For more
information, refer to
Section 4.11.2
Loading a Configuration
To load a configuration file for RUGGEDCOM ROX II, do the following:
Managing the Software Configuration
Section 4.9.2, "Backing Up Files".
Chapter 4
Device Management
81