Siemens RUGGEDCOM ROX II User Manual page 604

Chapter 13
Unicast and Multicast Routing
Section 13.11.2
Viewing VRF Interface Statistics
To view statistics for interfaces associated with a VRF instance, type:
show interfaces vrf vrf ip
Where:
• vrf is the chosen VRF list
A table or list similar to the following example appears:
ruggedcom# show interfaces vrf VRF1 ip | tab
ADMIN
TX
NAME STATE STATE
DROPPED COLLISIONS
---------------------------------------------------------------------------------------------------------------
fe-1-1 not set not set
0
fe-1-2 not set not set
0
fe-1-3 not set not set
0
This table or list provides the following information:
Parameter
name
admin-state
state
pointopoint
bytes
packets
errors
558
RX
IPV4
POINTOPOINT BYTES
ADDRESS
false 8842726
1.9.5.2/24
false 4874496
1.7.5.1/24
false 7730176
1.1.1.1/32
Synopsis: A string 1 to 15 characters long
The name of the interface.
Synopsis: { not set, up, down, testing, unknown, dormant, notPresent, lowerLayerDown }
The port's administrative status.
This parameter is mandatory.
Synopsis: { not set, up, down, testing, unknown, dormant, notPresent, lowerLayerDown }
Shows whether the link is up or down.
This parameter is mandatory.
Synopsis: { true, false }
The point-to-point link.
This parameter is mandatory.
Synopsis: A 64-bit unsigned integer
The number of bytes received.
This parameter is mandatory.
Synopsis: A 64-bit unsigned integer
The number of packets received.
This parameter is mandatory.
Synopsis: A 32-bit unsigned integer
The number of error packets received.
RX RX RX
PACKETS ERRORS DROPPED
117751 0 0
70821 0 0
120784 0 0
Description
RUGGEDCOM ROX II
CLI User Guide
TX TX TX
BYTES PACKETS ERRORS
5366914 64721 0
5849272 71022 0
9423076 120810 0
Viewing VRF Interface Statistics
TX
0
0
0