Siemens RUGGEDCOM ROX II User Manual page 645

RUGGEDCOM ROX II
CLI User Guide
Where prefix is the prefix for the multicast group (e.g. 225.1.2.0/24).
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 13.14.9.3
Deleting a Multicast Group Prefix
To delete a multicast group prefix, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the multicast group prefix by typing:
no routing multicast dynamic pim-sm group-prefix prefix
Where prefix is the chosen prefix.
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Deleting a Multicast Group Prefix
Chapter 13
Unicast and Multicast Routing
599