Siemens RUGGEDCOM ROX II User Manual page 368

Chapter 9
Layer 3
Parameter
If no ARP table entries have been configured, add static ARP table entries as needed. For more information, refer
to Section 9.3.2, "Adding a Static ARP Table
Section 9.5
Viewing Routing Rules
To view a list of routing rules, type:
show switch layer3-switching routing-rules-summary
A table or list similar to the following example appears:
ruggedcom# show switch layer3-switching routing-rules-summary
PACKETS
RULE RULE IN
ROUTING
ID TYPE VLAN
ACTION STATUS
---------------------------------------------------------------------------------------------
0 unicast -
forward active
1 unicast -
forward active
2 unicast -
forward active
3 unicast -
forward active
4 unicast -
forward active
5 unicast -
forward active
6 unicast -
forward active
7 unicast -
forward active
8 unicast -
forward active
9 unicast -
forward active
10 unicast -
forward active
11 unicast -
forward active
12 unicast -
forward active
This table or list provides the following information:
Parameter
rule-id
rule-type
322
• Unresolved: the device hasn't resolved the MAC-IP address pair and keeps sending ARP
requests periodically.
Entry".
OUT
VLAN PROTO SOURCE
- 17 192.12.1.120
- 17 192.12.1.69
- 17 192.11.0.160
- 17 192.11.0.92
- 17 192.12.0.92
- 17 192.12.0.254
- 17 192.12.0.223
- 17 192.11.0.85
- 17 192.12.0.95
- 17 192.12.0.180
- 17 192.12.0.67
- 17 192.12.0.161
- 17 192.11.2.190
Synopsis: A 32-bit unsigned integer between 0 and 2999
Defines the order in which rules are matched on each ingress packet. The first matched rule
is applied on the packet.
Synopsis: { multicast, unicast, invalid, hidden }
Identifies the type of the rule: unicast,multicast,invalid.
Description
SRC DEST
PORT DESTINATION PORT
1024 192.11.1.120 1024
1024 192.11.1.69 1024
1024 192.12.0.160 1024
1024 192.12.0.92 1024
1024 192.11.0.92 1024
1024 192.11.0.254 1024
1024 192.11.0.223 1024
1024 192.12.0.85 1024
1024 192.11.0.95 1024
1024 192.11.0.180 1024
1024 192.11.0.67 1024
1024 192.11.0.161 1024
1024 192.12.2.190 1024
Description
RUGGEDCOM ROX II
CLI User Guide
PER
GATEWAY SECOND
192.11.1.120 11
192.11.1.69 11
192.12.0.160 11
192.12.0.92 11
192.11.0.92 11
192.11.0.254 11
192.11.0.223 11
192.12.0.85 11
192.11.0.95 11
192.11.0.180 12
192.11.0.67 11
192.11.0.161 11
192.12.2.190 11
Viewing Routing Rules
STATIC
false
false
false
false
false
false
false
false
false
false
false
false
false