Siemens RUGGEDCOM ROX II User Manual page 168

Chapter 5
System Administration
Parameter
job-type { job-type }
job-minute { job-minute }
job-hour { job-hour }
job-day-month { job-day-month }
job-month { job-month }
job-day-week { job-day-week }
122
The name of the scheduled job. The name can be up to 64 characters in length.
Synopsis: { configchange, periodic }
Default: periodic
Determines when to launch the scheduled job:
• periodic: The job launches at a set date and time.
• configchange: The job launches when the configuration changes.
Synopsis: A string 1 to 128 characters long
Default: 0
For periodic jobs, sets the minutes portion of the job launch time. Valid values are in the
range of 0 to 59. If no value is set, the scheduler uses the default value of 0 and launches
the job every hour on the the hour.
• To specify a single value, enter the value in the field. For example, to launch the job 10
minutes past the hour, enter 10.
• To specify a list of values, enter the values as a comma-separated list. For example, to
launch the job at 15, 30, and 45 minutes past the hour, enter 15,30,45.
• To specify a range of values, enter the range as comma-separated values. For example,
to launch the job every minute between 30 and 45 minutes past the hour, enter
30-45.
This parameter is not required for configchange jobs.
Synopsis: A string 1 to 64 characters long
For periodic jobs, sets the hour portion of the job launch time, in the 24-hour clock
format. Valid values are in the range of 0 to 23. If no value is set, the job launches every
hour at the time set in the Minute field.
• To specify a single value, enter the value in the field. For example, to launch the job at
5:00 pm, enter 17.
• To specify a list of values, enter the values as a comma-separated list. For example, to
launch the job at 9:00 am, 12:00 pm, and 5:00 pm, enter 9,12,17.
• To specify a range of values, enter the range as comma-separated values. For example,
to launch the job every hour between 9:00 am and 5:00 pm, enter 9-17.
This parameter is not required for configchange jobs.
Synopsis: A string 1 to 64 characters long
For periodic jobs, sets the day of the month on which to run the scheduled job. Valid
values are in the range of 1 to 31. If no value is set, the job launches every day.
• To specify a single value, enter the value in the field. For example, to launch the job on
the tenth day of the month, enter 10.
• To specify a list of values, enter the values as a comma-separated list. For example, to
launch the job on the first, fifteenth, and thirtieth days of the month, enter 10,15,30.
• To specify a range of values, enter the range as comma-separated values. For example,
to launch the job on days one through fifteen, enter 1-15.
This parameter is not required for configchange jobs.
Synopsis: A string 1 to 32 characters long
For periodic jobs, sets the month in which to run the scheduled job. Valid values are in
the rage of 1 to 12. If no value is set, the job launches every day.
• To specify a single value, enter the value in the field. For example, to set the month to
February, enter 2.
• To specify a list of values, enter the values as a comma-separated list. For example, to
set the months to January, June, and December, enter 1,6,12.
• To specify a range of values, enter the range as comma-separated values. For example,
to set the months to January through June, enter 1-6.
This parameter is not required for configchange jobs.
Synopsis: A string 1 to 16 characters long
Description
Adding a Scheduled Job
RUGGEDCOM ROX II
CLI User Guide