Siemens RUGGEDCOM ROX II User Manual page 86

Chapter 2
Using RUGGEDCOM ROX II
Parameter
admin shutdown
admin software-upgrade decline-
upgrade
admin software-upgrade launch-
upgrade
admin software-upgrade rollback-
reboot
maint-login
monitor start filename
monitor stop filename
reportstats
config private
config exclusive
40
Shuts down the device.
For more information on shutting down the device, refer to
Device"
Cancels (or declines) a recent software upgrade that is waiting for a reboot to the upgraded
partition.
Launches an upgrade in the alternate partition.
Boots to a previous software release on the alternate partition.
CAUTION!
Configuration hazard – risk of data loss/corruption. Maintenance mode is
provided for troubleshooting purposes and should only be used by Siemens
Canada Ltd technicians. Maintenance mode is provided for troubleshooting
purposes and all possible commands are not documented. Misuse of
maintenance mode commands can corrupt the operational state of the device
and render the device inaccessible.
Logs in to the underlying operating system as the root user. The user must be an
administrator and be able to provide the maint-login password.
Starts displaying the specified system log or tracing the specified file. If necessary, the output
can be redirected to a file. For information on how to redirect output, refer to
"Using Output Redirects". Use auto completion to view a list of available logs and files.
Stops displaying the specified system log or tracing the specified file. Use auto completion to
view a list of available logs and files.
Displays an extensive collection of device-specific statistics. If necessary, the output can be
redirected to a file. For information on how to redirect output, refer to
Output Redirects".
Enters a configuration mode where users can make changes to the system. This is
the primary mode for most users who want to make changes to the device/network
configuration. It can be accessed by multiple Operator and Admin users.
All changes made during a private configuration session are hidden from other users until
they are committed. Each change must be committed before it is applied to the active
system.
If a user opens an exclusive configuration session during another user's private configuration
session, the user in the private configuration session cannot commit their changes until the
other user ends their session.
Enters a configuration mode where users can make changes to the system. This mode
is similar to the private configuration mode, except all other users are blocked from
committing their changes until the user using the exclusive configuration mode exits. Only
one Operator or Admin user can use the exclusive configuration mode at a time per device.
When committing changes in exclusive configuration mode, use the confirmed option
to set a timeout period. Changes will be applied for the set period of time, after which
the configuration will be reset to its previous settings. This allows users to test their
configuration changes before fully applying them to the active system.
For more information about the confirmed option, refer to
Mode General Commands".
IMPORTANT!
Always log out of the exclusive configuration mode or exit the transaction. If
the session is terminated before a user exits properly, other users logged in to
Description
Section 4.4, "Shutting Down the
Section 2.5.10.5, "Configuration
Administration Commands
RUGGEDCOM ROX II
CLI User Guide
Section 2.5.6,
Section 2.5.6, "Using