Siemens RUGGEDCOM ROX II User Manual page 711

RUGGEDCOM ROX II
CLI User Guide
Parameter
notification-interval { notification-interval }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 15.1.2
Viewing Global Statistics and Advertised System Information
To view global statistics for LLDP, type:
show switch net-discovery lldp global-statistics
A table or list similar to the following appears:
ruggedcom# show switch net-discovery lldp global-statistics
global-statistics
inserts
deletes
drops
ageouts
last change time 3D14m19s
This table or list displays the following information:
Parameter
inserts
deletes
drops
ageouts
last-change-time
To view the system information that is advertised to neighbors, type:
show switch net-discovery lldp local-system
Viewing Global Statistics and Advertised System
Information
The delay in seconds between successive LLDP frame transmissions initiated by the value
or status changed. The recommended value is set by the following formula: 1 is less than
or equal to txDelay less than or equal to (0.25 * Tx Interval)
Synopsis: A 32-bit signed integer between 5 and 3600
Default: 5
Controls transmission of LLDP traps. The agent must not generate more than one trap in
an indicated period.
21
20
0
8
Synopsis: A 32-bit unsigned integer between 0 and 4294967295
The number of times an entry was inserted into the LLDP Neighbor Information Table.
This parameter is mandatory.
Synopsis: A 32-bit unsigned integer between 0 and 4294967295
The number of times an entry was deleted from the LLDP Neighbor Information Table.
This parameter is mandatory.
Synopsis: A 32-bit unsigned integer between 0 and 4294967295
The number of times an entry was deleted from the LLDP Neighbor Information Table
because the information timeliness interval has expired.
This parameter is mandatory.
Synopsis: A 32-bit unsigned integer between 0 and 4294967295
The number of all TLVs discarded.
This parameter is mandatory.
Synopsis: A string
The duration of time between power-on and when this information was received.
This parameter is mandatory.
Network Discovery and Management
Description
Description
Chapter 15
665