Siemens RUGGEDCOM ROX II User Manual page 665

RUGGEDCOM ROX II
CLI User Guide
1. Make sure the CLI is in Configuration mode.
2. Delete the dedicated link by typing:
no services conn-sync dedicated-link name
Where name is the name of the dedicated link.
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 14.1.10.6
Selecting a Default Dedicated Link
To select a default a dedicated link, do the following:
1. Make sure the CLI is in Configuration mode.
2. Set the default dedicated link by typing:
services conn-sync default-dedicated-link link
Where link is the name of the default dedicated link.
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 14.1.10.7
Viewing the Status of Each Dedicated Link
To view the status of all dedicated links, do the following:
1. Make sure the CLI is in Configuration mode.
2. To view the status of all dedicated links, type the following:
show services conn-sync status
A list similar to the following example appears:
ruggedcom# show services conn-sync status
status fe-2-3
state
role
byte sent
byte received
packet sent
packet received 0
error sent
error received
status fe-2-4
state
role
byte sent
byte received
packet sent
packet received 0
error sent
error received
The list provides the following information:
Selecting a Default Dedicated Link
NO-CARRIER
ACTIVE
3614860
0
114224
0
0
NO-CARRIER
BACKUP
0
0
0
0
0
Chapter 14
Network Redundancy
619