Siemens RUGGEDCOM ROX II User Manual page 373

RUGGEDCOM ROX II
CLI User Guide
Parameter
parity-errors
framing-errors
overrun-errors
Section 10.1.2
Viewing Transport Connection Statistics
To view the statistics collected for all transport connections, type:
show interfaces serial transport-connections
A table or list similar to the following appears:
ruggedcom# show interfaces serial transport-connections | tab
INDEX REMOTE IP
------------------------------------------------------------------------------------
1 10.200.22.199
To view the statistics collected for a specific transport connection, type:
show interfaces serial transport-connections index
A table or list similar to the following appears:
ruggedcom# show interfaces serial transport-connections 1 | tab
INDEX REMOTE IP
---------------------------------------------------------------------------------
1 192.168.12.2
These tables or lists provide the following information:
Parameter
index
remote-ip
remote-port
local-port
Viewing Transport Connection Statistics
Synopsis: A 32-bit unsigned integer
The number of parity errors on this serial port.
This parameter is mandatory.
Synopsis: A 32-bit unsigned integer
The number of framing errors on this serial port.
This parameter is mandatory.
Synopsis: A 32-bit unsigned integer
The number of overrun errors on this serial port.
This parameter is mandatory.
REMOTE LOCAL
PORT PORT TRANSPORT
15836 20000 TCP
REMOTE LOCAL
PORT PORT TRANSPORT
55677 502 TCP
Synopsis: A string 1 to 32 characters long
The transport connection index.
Synopsis: A string 1 to 32 characters long
The IP address of the remote serial server.
This parameter is mandatory.
Synopsis: A 32-bit signed integer
The port of the remote serial server.
This parameter is mandatory.
Synopsis: A 32-bit signed integer
The local port for the incoming connection.
Description
RX TX TARGET
PACKETS PACKETS PORT
177 0 ser-3-1,
RX TX TARGET
PACKETS PACKETS PORT
3691 3691 ser-2,
Description
Serial Server
STATUS
Active
STATUS
Active
Chapter 10
327