Siemens RUGGEDCOM ROX II User Manual page 570

Chapter 13
Unicast and Multicast Routing
192.168.212.0 0.0.0.1
as-external
This list provides the following information:
Router
Parameter
area
Net
Parameter
area
Summary
Parameter
area
If no dynamic OSPF routes have been configured, configure OSPF and add routes as needed. For more information
about configuring OSPF, refer to
Section 13.9.4
Managing Prefix Lists and Entries
Neighbors can be associated with prefix lists, which allow the OSPF daemon to filter incoming or outgoing routes
based on the allow and deny entries in the prefix list.
CONTENTS
• Section 13.9.4.1, "Viewing a List of Prefix Lists"
• Section 13.9.4.2, "Viewing a List of Prefix Entries"
• Section 13.9.4.3, "Adding a Prefix List"
• Section 13.9.4.4, "Adding a Prefix Entry"
• Section 13.9.4.5, "Deleting a Prefix List"
• Section 13.9.4.6, "Deleting a Prefix Entry"
Section 13.9.4.1
Viewing a List of Prefix Lists
To view a list of prefix lists for dynamic OSPF routes, type:
• For Standard OSPF Routes
routing ospf filter prefix-list
524
22.22.22.22 44 0x80000008
METRIC
Synopsis: A string
Area.
Synopsis: A string
Area ID.
Synopsis: A string
Area ID.
Section 13.9.2, "Configuring
192.168.212.0/24
Description
Description
Description
OSPF".
RUGGEDCOM ROX II
CLI User Guide
Managing Prefix Lists and Entries