Siemens RUGGEDCOM ROX II User Manual page 657

RUGGEDCOM ROX II
CLI User Guide
Parameter
vrrp-version { vrrp-version }
interface { interface }
vrid { vrid }
priority { priority }
advert-interval { advert-interval }
advert-interval-millisecond { advert-
interval-millisecond }
garp-delay { garp-delay }
nopreempt
preempt-delay { preempt-delay }
fault-to-master-delay { fault-to-master-
delay }
use-virtual-mac
group { group }
5. Add one or more VRRP monitors. For more information, refer to
6. Add one or more track scripts. For more information, refer to
7. Add one or more virtual IP addresses. For more information, refer to
Address".
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
8.
Adding a VRRP Instance
Synopsis: An 8-bit unsigned integer between 2 and 3
Default: 2
Configure VRRP version for this instance.
Synopsis: A string
The interface that will host the VRIP when the router becomes the VRRP Master.
This parameter is mandatory.
Synopsis: An 8-bit unsigned integer between 1 and 255
The Virtual Router ID. All routers supplying the same VRIP should have the same VRID.
This parameter is mandatory.
Synopsis: An 8-bit unsigned integer between 0 and 255
The priority for the VRRP instance. When electing the master, the highest priority wins.
The configurable range is 1 to 255. A value of zero (0) is invalid.
This parameter is mandatory.
Synopsis: An 8-bit unsigned integer between 1 and 255
Default: 1
VRRP2 advertisement interval, in seconds.
Synopsis: A 32-bit unsigned integer between 20 and 3000
Default: 1000
VRRP3 advertisement interval in millisecond, must be multiple of 10.
Synopsis: An 8-bit unsigned integer between 1 and 255
Default: 5
Gratuitous ARP delay, in seconds. Sets the delay after the router changes state state
before a second set of gratuitous ARPs are sent.
When enabled, a lower priority router maintains its role as master even if this router has
a higher priority.
Synopsis: A 32-bit unsigned integer between 0 and 1000
Default: 0
The time, in seconds, after startup until preemption.
Synopsis: A 32-bit unsigned integer between 0 and 1000
Default: 0
The delay, in seconds, before a transition from the fault state to the master state occurs,
thereby preempting the current master.
When enabled, the router uses a virtual MAC address for the VRIP interface.
Synopsis: A string
Binds this VRRP instance to a VRRP group.
Section 14.1.8.2, "Adding a Track
Description
Section 14.1.7.2, "Adding a VRRP
Section 14.1.9.2, "Adding a Virtual IP
Chapter 14
Network Redundancy
Monitor".
Script".
611