Siemens RUGGEDCOM ROX II User Manual page 719

Hide thumbs Also See for RUGGEDCOM ROX II:
Table of Contents

Advertisement

RUGGEDCOM ROX II
CLI User Guide
Parameter
auth-failure-trap-notify { auth-failure-trap-
notify }
authen-traps-enabled
dscp { dscp }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 15.2.3
Viewing Statistics for SNMP
To view the statistics collected for SNMP, type:
show admin snmp statistics
If statistics are available, a table or list similar to the following example appears:
ruggedcom# show admin snmp statistics
statistics
unsupported sec levels 1
not in time windows
unknown user names
unknown engine ids
wrong digests
decryption errors
This table or list provides the following information:
Parameter
unsupported-sec-levels
not-in-time-windows
unknown-user-names
Viewing Statistics for SNMP
If set, all traffic/traps originating from this device shall use the configured IP Address for
the Source IP.
Synopsis:   { none, snmpv1_trap, snmpv2_trap, snmpv2_inform, snmpv3_trap,
snmpv3_inform }
Default:   none
When the SNMP agent sends the standard authenticationFailure notification,
it is delivered to the management targets defined for the snmpNotifyName
in the snmpNotifyTable in SNMP-NOTIFICATION-MIB (RFC3413). If
authenticationFailureNotifyName is the empty string (default), the notification is
delivered to all management targets.
Synopsis:   { true, false }
Default:   false
Enables authentication traps to be sent from the SNMP agent.
Synopsis:   An 8-bit unsigned integer between 0 and 63
Default:   0
Support for setting the Differentiated Services Code Point (6 bits) for traffic originating
from the SNMP agent.
1
1
4
1
1
Synopsis:   A 32-bit unsigned integer
The total number of packets received by the SNMP engine which were dropped because they
requested a securityLevel that was unknown to the SNMP engine or otherwise unavailable.
This parameter is mandatory.
Synopsis:   A 32-bit unsigned integer
The total number of packets received by the SNMP engine which were dropped because they
appeared outside of the authoritative SNMP engine's window.
This parameter is mandatory.
Synopsis:   A 32-bit unsigned integer
The total number of packets received by the SNMP engine which were dropped because they
referenced a user that was not known to the SNMP engine.
Network Discovery and Management
Description
Description
Chapter 15
673

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents