Siemens RUGGEDCOM ROX II User Manual page 483

RUGGEDCOM ROX II
CLI User Guide
Parameter
interface
type
weight
metric
If no IPv6 routes have been configured, add routes as needed. For more information, refer to
"Adding an IPv6 Static
Section 13.3
Viewing the Memory Statistics
To view statistics related to the Core, RIP, OSPF and BGP daemons, type:
show routing status memory
A list similar to the following example appears:
ruggedcom# show routing status memory
routing status memory
zebra
total 405504
used 359424
free 46080
rip
total 0
used 0
free 0
ospf
total 0
used 0
free 0
bgp
total 0
used 0
free 0
This list provides the following information:
Parameter
total
used
free
Viewing the Memory Statistics
The gateway address.
Synopsis: A string
The interface name.
Synopsis: A string
The route type.
Synopsis: A string
The route weight.
Synopsis: A string
The metric value.
Route".
Synopsis: A 32-bit unsigned integer
The total heap allocated (in bytes).
This parameter is mandatory.
Synopsis: A 32-bit unsigned integer
The number of used ordinary blocks (in bytes).
This parameter is mandatory.
Synopsis: A 32-bit unsigned integer
Unicast and Multicast Routing
Description
Section 13.12.3,
Description
Chapter 13
437