Siemens RUGGEDCOM ROX II User Manual page 41

RUGGEDCOM ROX II
CLI User Guide
Preface
This guide describes the CLI user interface for RUGGEDCOM ROX II v2.12 running on the RUGGEDCOM RX5000/
MX5000/MX5000RE. It contains instructions and guidelines on how to use the software, as well as some general
theory.
It is intended for use by network technical support personnel who are familiar with the operation of networks. It is
also recommended for use by network and system planners, system programmers, and line technicians.
CONTENTS
• "Conventions"
• "Related Documents"
• "System Requirements"
• "Accessing Documentation"
• "License Conditions"
• "Training"
• "Customer Support"
Conventions
This CLI User Guide uses the following conventions to present information clearly and effectively.
Alerts
The following types of alerts are used when necessary to highlight important information.
DANGER!
DANGER alerts describe imminently hazardous situations that, if not avoided, will result in death or
serious injury.
WARNING!
WARNING alerts describe hazardous situations that, if not avoided, may result in serious injury and/or
equipment damage.
CAUTION!
CAUTION alerts describe hazardous situations that, if not avoided, may result in equipment damage.
IMPORTANT!
IMPORTANT alerts provide important information that should be known before performing a procedure
or step, or using a feature.
Conventions
Preface
xli