Siemens RUGGEDCOM ROX II User Manual page 42

Hide thumbs Also See for RUGGEDCOM ROX II:
Table of Contents

Advertisement

 
Preface
NOTE
NOTE alerts provide additional information, such as facts, tips and details.
CLI Command Syntax
The syntax of commands used in a Command Line Interface (CLI) is described according to the following
conventions:
Example
command
command parameter
command parameter1 parameter2
command parameter1 parameter2
command [ parameter1 | parameter2 ]
command { parameter3 | parameter4 }
command parameter1 parameter2 { parameter3 |
parameter4 }
Related Documents
The following are other documents related to this product that may be of interest. Unless indicated otherwise,
each document is available on the
website.
NOTE
Documents listed are those available at the time of publication. Newer versions of these documents
or their associated products may be available. For more information, visit SIOS or consult a Siemens
Customer Support representative.
Product Notes
Product notes are available online via
User/Reference Guides
RUGGEDCOM ROX II v2.12 Web Interface User Guide
RUGGEDCOM ROX II NETCONF Reference Guide
RUGGEDCOM NMS v2.1 User Guide for Windows
RUGGEDCOM NMS v2.1 User Guide for Linux
xlii
Siemens Industry Online Support (SIOS)
SIOS
[https://support.industry.siemens.com/cs/ca/en/ps/16008/pm].
Document Title
Description
Commands are in bold.
Parameters are in plain text.
Parameters are listed in the order they must be entered.
Parameters in italics must be replaced with a user-defined value.
Alternative parameters are separated by a vertical bar (|).
Square brackets indicate a required choice between two or more
parameters.
Curly brackets indicate an optional parameter(s).
All commands and parameters are presented in the order they must
be entered.
[https://support.industry.siemens.com]
https://support.industry.siemens.com/cs/ww/en/view/109481702
https://support.industry.siemens.com/cs/ww/en/view/109737085
https://support.industry.siemens.com/cs/ww/en/view/109737564
https://support.industry.siemens.com/cs/ww/en/view/109737563
RUGGEDCOM ROX II
CLI User Guide
Link
Related Documents

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents