Siemens RUGGEDCOM ROX II User Manual page 509

RUGGEDCOM ROX II
CLI User Guide
192.168.50.0/24
192.168.60.0/24
This list provides the following information:
Parameter
network
type
sub-type
next-hop
metric
from
tag
time
To view the status of the RIP interfaces configured on the device, type:
show routing status rip interface
If RIP interfaces have been configured, a table or list similar to the following example appears:
ruggedcom# show routing status rip interface | tab
NAME NETWORK
--------------------------------------------------------------------------------------
switch.1112
192.168.11.0/24
This list provides the following information:
Parameter
network
type
sub-type
next-hop
metric
Viewing the Status of Dynamic RIP Routes
connected interface
connected interface
Synopsis: A string
The network.
Synopsis: A string
The route type.
Synopsis: A string
The route sub type.
Synopsis: A string
The next hop.
Synopsis: A string
The metric value.
Synopsis: A string
Where this route comes from.
Synopsis: A string
Tag.
Synopsis: A string
The route update time.
TYPE
connected
Synopsis: A string
The network.
Synopsis: A string
The route type.
Synopsis: A string
The route sub type.
Synopsis: A string
Next hop.
Synopsis: A string
The metric value.
0.0.0.0 1 self
0.0.0.0 1 self
NEXT
SUB TYPE HOP
interface 0.0.0.0
Unicast and Multicast Routing
0
0
Description
METRIC FROM TAG TIME
1 self 0
Description
Chapter 13
463