Siemens RUGGEDCOM ROX II User Manual page 400

Chapter 10
Serial Server
1. Make sure the CLI is in Configuration mode.
2. Navigate to:
interface serial slot port protocols rawsocket setrawsocket local-host local-host interface
Where:
• slot is the name of the module location
• port is the port number (or a list of ports, if aggregated in a port trunk) for the module
• local-host is the local host
3. Configure the following parameter(s) as required:
Parameter
{ name }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
4.
Section 10.8.3
Deleting a Local Host Interface
To delete a local host interface, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the local host by typing:
no interface serial slot port protocols rawsocket setrawsocket local-host local-host interface
interface name
Where:
• slot is the name of the module location
• port is the port number (or a list of ports, if aggregated in a port trunk) for the module
• local-host is the local host
• interface name is the name of the interface
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
354
Synopsis: A string
The receiving interface's name for the source multicast group IP address and the local
port number defined for the serial port.
Description
Deleting a Local Host Interface
RUGGEDCOM ROX II
CLI User Guide