Siemens RUGGEDCOM ROX II User Manual page 320

Chapter 8
Layer 2
Parameter
speed
duplex
mtu
mac
Section 8.1.5
Viewing RMON Port Statistics
To view Remote Network Monitoring (RMON) statistics collected for a specific switched Ethernet port, type:
show interfaces switch slot port rmon-stats
Where:
• slot is the name of the module location
• port is the port number (or a list of ports, if aggregated in a port trunk) for the module
A table or list similar to the following example appears:
ruggedcom# show interfaces switch lm1 1 rmon-stats | tab
rmon-stats
in octets
in pkts
in bcast pkts
in mcast pkts
total in octets
total in pkts
out octets
out pkts
drop events
out bcast pkts
out mcast pkts
crc align errors
undersize pkts
oversize pkts
fragments
jabbers
collisions
late collisions
pkts 64 octets
pkts 65to127 octets
pkts 128to255 octets
pkts 256to511 octets
pkts 512to1023 octets
274
This parameter is mandatory.
Synopsis: { auto, 1.5M, 2.4M, 10M, 100M, 1G, 10G, 1.776M, 3.072M, 7.2M, 1.2K, 2.4K,
9.6K, 19.2K, 38.4K, 57.6K, 115.2K, 230.4K, 4.8K, 76.8K }
Speed (in Megabits-per-second or Gigabits-per-second)
This parameter is mandatory.
Synopsis: { auto, half, full }
Duplex Setting: { Auto, Half, Full }
This parameter is mandatory.
Synopsis: A 32-bit signed integer
The Maximum Transmission Unit of frame (in bytes) permitted on the interface.
This parameter is mandatory.
Synopsis: A string 17 characters long
The MAC Address of this specific port.
This parameter is mandatory.
10107903
53903
607
42103
10107903
53903
4974162
14356
0
0
405
0
0
0
0
0
0
0
10978
24792
19970
2469
8410
Description
Viewing RMON Port Statistics
RUGGEDCOM ROX II
CLI User Guide