Show Ip Ssh; Hypertext Transfer Protocol (Http) Commands; Ip Http Server; Ip Http Secure-Server - D-Link DWL-8500AP Command Reference Manual

CLI Command Reference
Format
Mode

show ip ssh

This command displays the ssh settings.
Format
Mode
Administrative Mode This field indicates whether the administrative mode of SSH is
Protocol Level The protocol level may have the values of version 1, version 2 or both ver-
Connections This field specifies the current SSH connections.

Hypertext Transfer Protocol (HTTP) Commands

This section describes the commands you use to configure HTTP and secure HTTP access to
the switch. Access to the switch by using a Web browser is enabled by default. Everything you
can view and configure by using the CLI is also available by using the Web.

ip http server

This command enables access to the switch through the Web interface. When access is
enabled, the user can login to the switch from the Web interface. When access is disabled, the
user cannot login to the switch's Web server. Disabling the Web interface takes effect
immediately. All interfaces are affected.
Default
Format
Mode
no ip http server
This command disables access to the switch through the Web interface. When access is
disabled, the user cannot login to the switch's Web server.
Format
Mode

ip http secure-server

This command is used to enable the secure socket layer for secure HTTP.
Default
Format
Mode
304 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
no sshcon timeout
Privileged EXEC
show ip ssh
Privileged EXEC
enabled or disabled.
sions 1 and version 2.
enabled
ip http server
Privileged EXEC
no ip http server
Privileged EXEC
disabled
ip http secure-server
Privileged EXEC