Show Ip Bgp Parameters - D-Link xStack DGS-3620 Series Reference Manual

DGS-3620 m/ mSW Rls. 1.02.000

2-104 show ip bgp parameters

show ip bgp parameters
Syntax
Description
Default
Command Mode
Usage Guideline
Examples
Switch#show ip bgp parameters
BGP Global State
Version
BGP Router Identifier
Synchronization
Enforce First AS
Local AS Number
Hold Time
Keepalive Interval
Always Compare MED
Deterministics MED
Med Confed
Default Local Preference
AS Path Ignore
Compare Router ID
MED Missing as Worst
Compare Confederation Path
Fast External Fallover
Aggregate Next Hop Check
Default IPv4 Unicast
Field
BGP Global State
Version
CLI Reference Guide
To display parameters of Border Gateway Protocol, use this command in user or
privileged privileged mode.
None.
None
Privileged mode.
This command displays the parameters of BGP.
This example output from the show ip bgp parameters command in privileged mode.
show ip bgp parameters Field Description
Description
BGP global state, In this version, BGP always is enabled.
BGP protocol version.
: Enabled
: 4
: 10.90.90.90
: Disabled
: Disabled
: 10
: 180 Seconds
: 60 Seconds
: Disabled
: Disabled
: Disabled
: 100
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled
: Disabled
: Enabled
show ip bgp parameters
183