Power-Budget-Priority; Preempt - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

power-budget-priority

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation

preempt

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
1212
®
OS for EX Series Ethernet Switches, Release 10.4
power-budget-priority priority;
[edit chassis fpc slot]
Statement introduced in Junos OS Release 10.2 for EX Sries switches.
Assign a power priority to the specified line card slot on an EX8200 switch.
All line card slots are initially assigned the lowest priority.
—Assigned power priority for the slot, with 0 being the highest priority.
priority
Range: 0 through 7 for an EX8208 switch; 0 through 15 for an EX8216 switch
Range: 0 through 15 for an EX8216 switch
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring the Power Priority of Line Cards (CLI Procedure) on page 1195
(preempt | no-preempt) {
hold-time seconds;
}
[edit interfaces interface-name unit logical-unit-number family inet6 address address
vrrp-inet6-group group-id]
Statement introduced in Junos OS Release 10.0 for EX Series switches.
Configure whether a backup router can preempt a master router:
—Allow the master router to be preempted.
preempt
—Prohibit the preemption of the master router.
no-preempt
The remaining statement is explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring VRRP for IPv6 (CLI Procedure) on page 1189
Copyright © 2010, Juniper Networks, Inc.