Upgrading The Original Master Routing Engine - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Upgrading the Original Master Routing Engine

Copyright © 2010, Juniper Networks, Inc.
Model: ex8208
JUNOS Base OS boot [10.4-20100828.0]
JUNOS Base OS Software Suite [10.4-20100828.0]
JUNOS Kernel Software Suite [10.4-20100828.0]
JUNOS Crypto Software Suite [10.4-20100828.0]
JUNOS Online Documentation [10.4-20100828.0]
JUNOS Enterprise Software Suite [10.4-20100828.0]
LC JUNOS Installation Software [10.4-20100828.0]
JUNOS Routing Software Suite [10.4-20100828.0]
JUNOS Web Management [10.4-20100828.0]
To verify that the line cards that were online before the upgrade are online after the
6.
upgrade, log in to the new master Routing Engine and enter the
command:
nonstop-upgrade
{backup}
user@switch> request routing-engine login master
--- JUNOS 10.4-20100828.0 built 2010-08-28 05:19:44 UTC
{master}
user@switch> show chassis nonstop-upgrade
Item
FPC 0
FPC 1
FPC 2
FPC 3
FPC 4
FPC 5
FPC 6
FPC 7
This procedure describes how to upgrade the original master Routing Engine after you
have upgraded the original backup Routing Engine as described in "Upgrading One Routing
Engine Using NSSU" on page 1201.
Log in to the current master Routing Engine (
1.
Enter configuration mode and disable nonstop active routing:
2.
{master}[edit]
user@switch# delete routing-options nonstop-routing
Deactivate graceful Routing Engine switchover and commit the configuration:
3.
{master}[edit]
user@switch# deactivate chassis redundancy graceful-switchover
{master}[edit]
user@switch# commit
Log in to the current backup Routing Engine (
4.
Request a software installation:
5.
user@switch> request system software add reboot
/var/tmp/package-name-m.nZx-distribution.tgz
Chapter 53: Administering High Availability
Status
Online
Online
Online
Offline
Online
Online
Online
Online
re1 ):
) using a console connection.
re0
show chassis
Reason
Offlined by CLI command
1203