Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1320

Complete Software Guide for Junos
Required Privilege
Level
Related
Documentation
1216
®
OS for EX Series Ethernet Switches, Release 10.4
If you specify a maximum number of files, you also must specify a maximum file size with
the option.
size
flag flag —Tracing operation to perform. To specify more than one tracing operation,
include multiple statements. The nonstop active routing tracing options are:
flag
—Detailed trace information for BFD nonstop active routing only
nsr-packet
—Tracing operations for nonstop active routing
nsr-synchronization
nsr-synchronization-detail
in detail
flag-modifier —(Optional) Modifier for the tracing flag. Except for BFD sessions, you can
specify one or more of these modifiers:
—Detailed trace information
detail
receive —Packets being received
send —Packets being transmitted
—Restrict users from reading the log file.
no-world-readable
—(Optional) Maximum size of each trace file, in kilobytes (KB), megabytes (MB),
size size
or gigabytes (GB). When a trace file named
. When the
trace-file.0 trace-file
trace-file.1 and trace-file
the maximum number of trace files is reached. Then the oldest trace file is overwritten.
Syntax: to specify KB,
xk xm
Range: 10 KB through the maximum file size supported on your system
Default: 128 KB
If you specify a maximum file size, you also must specify a maximum number of trace
files with the option.
files
—Allow users to read the log file.
world-readable
routing and trace—To view this statement in the configuration.
routing-control and trace-control—To add this statement to the configuration.
Tracing Nonstop Active Routing Synchronization Events on page 1191
—(MPLS only) Tracing operations for nonstop active routing
trace-file
again reaches its maximum size,
is renamed trace-file.0 . This renaming scheme continues until
to specify MB, or to specify GB
xg
reaches this size, it is renamed
is renamed
trace-file.0
Copyright © 2010, Juniper Networks, Inc.