Redundancy (Power Management) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
redundancy (Graceful Switchover)
Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation

redundancy (Power Management)

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
1214
®
OS for EX Series Ethernet Switches, Release 10.4
redundancy {
graceful-switchover;
}
[edit chassis]
Statement introduced in Junos OS Release 9.2 for EX Series switches.
For EX4200 switches configured as a Virtual Chassis and for EX8200 switches with more
than one Routing Engine, enable redundant Routing Engines.
The remaining statement is explained separately.
Redundancy is enabled for the Routing Engines.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Graceful Routing Engine Switchover in an EX4200 Virtual Chassis (CLI
Procedure) on page 1005
Installing Software on an EX8200 Switch with Redundant Routing Engines (CLI
Procedure) on page 85
redundancy {
n-plus-n;
}
[edit chassis psu]
Statement introduced in Junos OS Release 10.2 for EX Series switches.
Configure N+N power supply redundancy for power management on an EX8200 switch.
The remaining statement is explained separately.
N+1 power supply redundancy is configured by default.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Power Supply Redundancy (CLI Procedure) on page 1194
Copyright © 2010, Juniper Networks, Inc.