Vrrp-Inet6-Group - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

vrrp-inet6-group

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
vrrp-inet6-group group-id {
inet6-advertise-interval milliseconds;
preempt{
hold-time seconds;
}
priority number;
virtual-inet6-address;
virtual-link-local-address
}
[edit interfaces interface-name unit logical-unit-number family inet6 address address]
Statement introduced in Junos OS Release 10.0 for EX Series switches.
Configure a Virtual Router Redundancy Protocol (VRRP) IPv6 group.
—VRRP group identifier. If you enable MAC source address filtering on the
group-id
interface, you must include the virtual MAC address in the list of source MAC
addresses that you specify in the
ranging from 00:00:5e:00:01:00
as defined in RFC 3768. The VRRP group number must be the decimal equivalent
of the last hexadecimal byte of the virtual MAC address.
Range: 0 through 255
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring VRRP for IPv6 (CLI Procedure) on page 1189
Chapter 54: Configuration Statements for High Availability
statement. MAC addresses
source-address-filter
through 00:00:5e:00:01:ff are reserved for VRRP,
1219