Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1376

Complete Software Guide for Junos
Verification
Purpose
Action
Meaning
Purpose
1272
®
OS for EX Series Ethernet Switches, Release 10.4
unit 4 {
vlan-id 105;
family inet {
address 5.1.1.2/24;
}
}
}
To confirm that the configuration is working properly, perform these tasks:
Verifying That Subinterfaces Were Created on page 1272
Verifying That Traffic Passes Between VLANs on page 1272
Verifying That Subinterfaces Were Created
Verify that the subinterfaces were properly created on the access switch and distribution
switch.
Use the
show interfaces
1.
user@access-switch> show interfaces ge-0/1/0 terse
Interface
ge-0/1/0
ge-0/1/0.0
ge-0/1/0.1
ge-0/1/0.2
ge-0/1/0.3
ge-0/1/0.4
ge-0/1/0.32767
Use the show interfaces command on the distribution switch:
2.
user@distribution-switch> show interfaces ge-0/0/0 terse
Interface
ge-0/0/0
ge-0/0/0.0
ge-0/0/0.1
ge-0/0/0.2
ge-0/0/0.3
ge-0/0/0.4
ge-0/0/0.32767
Each subinterface created is displayed as a
is the unit number in the configuration. The status is listed as
working.
Verifying That Traffic Passes Between VLANs
Verify that the distribution switch is correctly routing traffic from one VLAN to another.
command on the access switch:
Admin Link Proto
up up
up up inet
up up inet
up up inet
up up inet
up up inet
up up
Admin Link Proto
up up
up up inet
up up inet
up up inet
up up inet
up up inet
up up
ge-fpc/pic/port.x
Local Remote
1.1.1.1/24
2.1.1.1/24
3.1.1.1/24
4.1.1.1/24
5.1.1.1/24
Local Remote
1.1.1.2/24
2.1.1.2/24
3.1.1.2/24
4.1.1.2/24
5.1.1.2/24
logical interface, where
, indicating the link is
up
Copyright © 2010, Juniper Networks, Inc.
x