Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1364

Complete Software Guide for Junos
Verification
Purpose
Action
Meaning
Purpose
1260
®
OS for EX Series Ethernet Switches, Release 10.4
minimum-links 2;
}
unit 0 {
family inet {
address 192.0.2.128/25;
}
}
xe–0/1/0 {
ether-options {
802.ad ae0;
}
}
xe–1/1/0 {
ether-options {
802.ad ae0;
}
}
xe–0/1/1 {
ether-options {
802.ad ae1;
}
}
xe–1/1/1 {
ether-options {
802.ad ae1;
}
}
}
To verify that switching is operational and two LAGs have been created, perform these
tasks:
Verifying That LAG ae0 Has Been Created on page 1260
Verifying That LAG ae1 Has Been Created on page 1260
Verifying That LAG ae0 Has Been Created
Verify that LAG ae0 has been created on the switch.
show interfaces ae0 terse
Interface Admin
ae0 up
ae0.0 up
The output confirms that the
to this link.
Verifying That LAG ae1 Has Been Created
Verify that LAG ae1 has been created on the switch
Link Proto Local
up
up inet 10.10.10.2/24
ae0 link is up and shows the
Copyright © 2010, Juniper Networks, Inc.
Remote
family and IP address assigned