Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1392

For ex series ethernet switches
Table of Contents

Advertisement

Complete Software Guide for Junos
1288
®
OS for EX Series Ethernet Switches, Release 10.4
card on an EX8200 switch or the member switch in a Virtual Chassis configuration)
that includes that interface from the
Details for the selected interface such as administrative status, link status, speed,
duplex, and flow control are displayed in the bottom table on the page.
NOTE: You can select multiple interfaces and modify their settings at the
same time. When you do this, you cannot modify the IP address or enable
or disable the administrative status of the selected interface.
Click
and select the set of options you want to configure first:
3.
Edit
Port Role—Enables you to assign a profile for the selected interface.
NOTE: When you select a particular port role, pre-configured port
security parameters are set for the VLAN that the interface belongs to.
For example, if you select the port role
examine-dhcp
interface belongs to. If there are interfaces in the VLAN that have static
IP addresses, those interfaces might lose connectivity because those
static IP addresses might not be present in the DHCP pool. Therefore,
when you are selecting a port role, ensure that the corresponding port
security settings for the VLAN are applicable to the interface.
For basic information on port security features such as DHCP snooping
(CLI option
arp-inspection
page 3131. For detailed descriptions of port security features, see the Port
Security topics in the EX Series documentation at
http://www.juniper.net/techpubs/
Click
to view the configuration parameters for the selected port role.
Details
VLAN Options—Enables you to configure VLAN options for the selected interface.
Link Options—Enables you to modify the following link options for the selected
interface:
Speed
MTU
Autonegotiation
Flow Control
Duplex
IP Options—Enables you to configure an IP address for the interface.
List Ports for FPC
and
are enabled on the VLAN that the
arp-inspection
) or dynamic ARP inspection (DAI) (CLI option
examine-dhcp
), see "Configuring Port Security (J-Web Procedure)" on
.
list.
, the port security options
Desktop
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents