Logical Part Of An Interface Name; Wildcard Characters In Interface Names - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Logical Part of an Interface Name

Wildcard Characters in Interface Names

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
On EX2200, EX3200, EX4200, and EX4500 switches, built-in network ports are
numbered from left to right. On models that have two rows of ports, the ports on
the top row start with
ports on the bottom row start with
Uplink ports in EX2200, EX3200, EX4200, and EX4500 switches are labeled from
left to right, starting with
On EX8200 switches, the network ports are numbered from left to right on each line
card. On line cards that have two rows of ports, the ports on the top row start with
0 followed by the remaining even-numbered ports, and the ports on the bottom row
start with followed by the remaining odd-numbered ports.
1
The logical unit part of the interface name corresponds to the logical unit number, which
can be a number from 0 through 16384. In the virtual part of the name, a period (.)
separates the port and logical unit numbers: type-fpc/pic/port.logical-unit-number. For
example, if you issue the
show ethernet-switching interfaces
a default VLAN, the resulting display shows the logical interfaces associated with the
VLAN:
Interface State VLAN members
ge-0/0/0.0 down remote-analyzer
ge-0/0/1.0 down default
ge-0/0/10.0 down default
When you configure aggregated Ethernet interfaces, you configure a logical interface
that is called a bundle or a LAG. Each LAG can include up to 8 or 12 Ethernet interfaces,
depending on the switch model.
In the and
show interfaces
in the option to specify groups of interface names without having to type
interface-name
each name individually. You must enclose all wildcard characters except the asterisk (*)
in quotation marks (" ").
EX Series Switches Interfaces Overview on page 1239
Front Panel of an EX2200 Switch
Front Panel of an EX3200 Switch
Front Panel of an EX4200 Switch
Front Panel of an EX4500 Switch
Slot Numbering for an EX8208 Switch
Slot Numbering for an EX8216 Switch
followed by the remaining even-numbered ports, and the
0
followed by the remaining odd-numbered ports.
1
.
0
Blocking
unblocked
unblocked
unblocked
commands, you can use wildcard characters
clear interfaces
Chapter 56: Interfaces—Overview
command on a system with
1243