Show Chassis Nonstop-Upgrade - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Required Privilege
Level
Related
Documentation
Output Fields
request system request system
software software
nonstop-upgrade nonstop-upgrade
Copyright © 2010, Juniper Networks, Inc.
Use
scp://hostname/pathname/package-name
credentials, use
scp://<username>:<password>@hostname/pathname/package-name
NOTE: The
directory on the remote system and not the root directory.
—(Optional) Install a software package or bundle, but do not save copies of
no-copy
package or bundle files.
—(Optional) Upgrade the backup Routing Engine only. After the
no-old-master-upgrade
upgrade completes, the original master Routing Engine becomes the backup Routing
Engine and continues running the previous software version.
—(Optional) When the reboot option is included, the original master (new backup)
reboot
Routing Engine is automatically rebooted after being upgraded to the new software.
When the reboot option is not included, you must manually reboot the original master
(new backup) Routing Engine using the
—(Optional) Remove the software package after a successful upgrade is completed.
unlink
maintenance
show chassis nonstop-upgrade on page 1225
Upgrading Software Using Nonstop Software Upgrade (CLI Procedure) on page 1197
When you enter this command, you are provided feedback on the status of your request.
{master}
user@switch> request system software nonstop-upgrade reboot
/var/tmp/jinstall-ex-8200–10.4R1.5–domestic-signed.tgz
Chassis ISSU Check Done
ISSU: Validating Image
ISSU: Preparing Backup RE
Pushing bundle to re1
WARNING: A reboot is required to install the software
WARNING: Use the 'request system reboot' command immediately
Backup upgrade done
Rebooting Backup RE
Rebooting re1
ISSU: Backup RE Prepare Done
Waiting for Backup RE reboot
GRES operational
Initiating Chassis In-Service-Upgrade
Chassis ISSU Started
ISSU: Preparing Daemons
ISSU: Daemons Ready for ISSU
ISSU: Starting Upgrade for FRUs
Chapter 55: Operational Commands for High Availability
pathname in the protocol is the relative path to the user home
request system reboot
. To specify authentication
.
command.
1223