Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 1398

For ex series ethernet switches
Table of Contents

Advertisement

Complete Software Guide for Junos
Table 190: Port Role Configuration Summary (continued)
Configuration Description
Set port security parameters.
Set RSTP protocol with
edge
RSTP protocol is disabled if redundant trunk groups
are configured.
Desktop and Phone Port Role
Set the port role to desktop and phone.
Set data VLAN if new VLAN is specified.
Set voice VLAN if new voice VLAN is specified.
Set port family to
ethernet-switching.
Set Port Mode to
.
access
Set data VLAN on port stanza.
Set port security parameters.
Set VOIP VLAN.
Set class of service parameters
=
SCHEDULER_MAP
juniper-port-profile-map
IEEE_CLASSIFIER
=
juniper-ieee-classifier
=
DSCP_CLASSIFIER
juniper-dscp-classifier
Set CoS Configuration
Wireless Access Point Port Role
Set the port role to wireless access point.
Set VLAN on VLANs stanza.
Set port family to
ethernet-ewitching
Set port mode to
Access
.
Set VLAN on port stanza.
Set RSTP protocol with edge option.
1294
®
OS for EX Series Ethernet Switches, Release 10.4
CLI Commands
set ethernet-switching-options secure-access-port vlan
MacTest arp-inspection
option.
set protocols rstp interface interface edge
set protocols rstp interface interface disable
set interfaces interfaceapply-macro juniper-port-profile
Desktop and Phone
set vlans vlan-namevlan-id vlan id
set interfaces interfaceunit 0 family ethernet-switching
port-mode access
set interfaces interface unit 0 family ethernet-switching
vlan members vlan-members
set ethernet-switching-options secure-access-port vlan
MacTest arp-inspection
set ethernet-switching-options voip interface interface.0
vlan vlan vlan name
set class-of-service interfaces interfacescheduler-map
juniper-port-profile-map
set class-of-service interfaces interface unit 0
classifiers ieee-802.1 juniper_ieee_classifier
set class-of-service interfaces interfaceunit 0 classifiers
dscp juniper-dscp-classifier
Refer Table 191 on page 1296 for details.
set interfaces interface apply-macro juniper-port-profile
Wireless Access Point
set vlans vlan namevlan-id vlan-id
set interfaces interface unit 0 family ethernet-switching
port-mode access
set interfaces interface unit 0 family ethernet-switching
vlan members vlan-members
set protocols rstp interface interface edge
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents